Windows 2000

37K

Solutions

32K

Contributors

Windows 2000 is an operating system for use on both client and server computers. It is the successor to Windows NT 4.0, and is the last version of Microsoft Windows to display the "Windows NT" designation. Four editions of Windows 2000 were released (Professional, Server, Advanced Server, and Datacenter Server) that shared a core set of features, including many system utilities such as the Microsoft Management Console. All versions of the operating system support NTFS 3.0, Encrypting File System, as well as basic and dynamic disk storage. The Windows 2000 Server family includes support for Active Directory services, Distributed File System and fault-redundant storage volumes.

Share tech news, updates, or what's on your mind.

Sign up to Post

I would like to create a VM from a Windows 2000 Server that houses an antiquainted application engine that uses Sql Server 2000 as a repository.  The application is necessary to access the first several years of structured information from their business.

What I'm looking for is a way to create a VM of this system and run it in the same Hyper-V environment housing a VM of the client side of this application.  I used DISK2VHD to make the VM of the client side, but needed to upgrade the client from XP to Windows 7 before DISK2VHD would run.  I understand DISK2VHD requires VSS which didn't come into play until xp and Server 2003.

What would recommend as a procedure to follow to accomplish this?

Thanks!
0
Get 15 Days FREE Full-Featured Trial
LVL 1
Get 15 Days FREE Full-Featured Trial

Benefit from a mission critical IT monitoring with Monitis Premium or get it FREE for your entry level monitoring needs.
-Over 200,000 users
-More than 300,000 websites monitored
-Used in 197 countries
-Recommended by 98% of users

I have a Dell PowerEdge 1750 server, and I replaced the motherboard and one of the three hard drives.  It was working fine for 3 days and then I get a "STOP: 0x0000007B INACCESSIBLE_BOOT_DEVICE" error.

I used the Windows 2000 Advanced Server CD to repair Windows and it automatically ran CHKDSK.  I can boot into Windows now, but it's very slow to open files or folders, and it doesn't open a tiny text file sometimes.

Would there be a record of this in the dmp files?  

Please help!
0
I have a Dell PowerEdge 1750 and it had an amber light last week.  I am guessing this error is caused by a low CMOS battery, but I'm not sure.  I didn't add any new hardware or software.

"A device driver has corrupted the executive memory pool.  If this is the first time you've this Stop error screen, restart your computer.  If this screen appears again, follow these steps ..."

Please see attached message.

After restarting the computer, Windows boots up again, but it keeps freezing.  Is this a low CMOS battery issue, or something else?
WIndows Server 2000 Error
0
When i give exp command, the help body is appearing.
Even if give exp username/password it is not getting executed, instead the help is appearing.
0
Converted windows server 2000 to vmdk format using vmware Vcenter converter standalone. The conversion failed at 97 % with an error "  unable to find the system volume, reconfiguration is not possible- Error: reconfiguration failed "
 
Could anyone please help me with this error.
 
still i tried to run the vmx in my vmware workstation 10, it did not startup. came with error  "cannot connect the virtual device serial0 because no corresponding device is available on the host "    "cannot connect the virtual device floppy0 because no corresponding device is available on the host "   "cannot connect the virtual device parallel0 because no corresponding device is available on the host "   "cannot connect the virtual device serial1 because no corresponding device is available on the host "
0
I'm attempting to install Windows 2000 Advanced Server operating system on a Dell 4600 server due to the following error: STOP:c0000218 {Registry File Failure}.  The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or alternate.  It is corrupt, absent, or not writable.

During the last stages of OS preparation for installation the following message was displayed: Setup did not find any hard disk drives installed in your computer.

Researching the issue we determined that installation was halted because the operating system couldn't see the online Raid drives - 2 Mirrored disks (Raid 1), 3 disks configured as Raid 5.  And, the drives are online.  The solution we was to download and install PERC3/DC drivers.  In attempting to install the drivers the following message displayed: File txtsetup.oem caused an unexpected error (512) at line 1041 in D:\nt\private\ntos\boot\setup\oemdisk.c.

Can someone recommend a solution to this problem?  The name of the downloaded file is perc-cerc-w2k-5.48-A04.exe.  It can be found within LSI Logic PERC3/DCL, PERC3/DC, PERC3/QC, PERC3/SC/PERC 4/Di, CERC ATA 100, PERC 4/SC, PERC 4/DC, PERC 4e/DC, Perc 4e/Di, PERC 4e/Si, V.5.48.0.0, A04, File Name: RAID_DRVR_WIN_R99973.EXE on the Dell website.

Thank you.
0

Windows 2000

37K

Solutions

32K

Contributors

Windows 2000 is an operating system for use on both client and server computers. It is the successor to Windows NT 4.0, and is the last version of Microsoft Windows to display the "Windows NT" designation. Four editions of Windows 2000 were released (Professional, Server, Advanced Server, and Datacenter Server) that shared a core set of features, including many system utilities such as the Microsoft Management Console. All versions of the operating system support NTFS 3.0, Encrypting File System, as well as basic and dynamic disk storage. The Windows 2000 Server family includes support for Active Directory services, Distributed File System and fault-redundant storage volumes.

Top Experts In
Windows 2000
<
Monthly
>