<

vShield Manager Configuration and vShield Endpoint Service Installation

Posted on
6,957 Points
857 Views
1 Endorsement
Last Modified:
Published
Experience Level: Beginner
5:09
Teach the user how to configure vShield Manager and how to install the vShield Endpoint service to ESXi hosts

Video Steps

1. Open web browser and connect to vShield Manager web interface

2. Configure NTP settings for vShield Manager

3. Open vSphere Web Client and reboot vShield Manager virtual appliance

4. Open web browser and connect to vShield Manager web interface

5. Configure Lookup Service and vCenter Server registration

6. Open vSphere Client

7. Deploy vShield Endpoint service to ESXi host

1
0 Comments
Make sure your ESXi server is up to date with the current firmware with - 2 Easy steps to upgrade VMware vSphere Hypervisor ESXi 7.0 GA to ESXi 7.0b Bulld 16324942  by downloading and applying the update directly from VMware.
HOW TO: BOOT VMware vSphere Hypervisor 7.0 (ESXi 7.0 ARM) from an iSCSI LUN for the Raspberry Pi 4, Step by Step Tutorial with screenshots. Setting up the Synology SAN to allow the Raspberry Pi 4 to BOOT ESXi 7.0 ARM edition.