<

Install and configure networking of ESXi 5.5

Posted on
7,346 Points
2 Comments
846 Views
5 Endorsements
Last Modified:
Published
Experience Level: Beginner
5:03
Brian Atkinson
Teach the user how to install ESXi 5.5 and configure the management network

Video Steps

1. System Requirements

2. ESXi Installation

3. Management Network Configuration

4. Management Network Testing

5
Author:Brian Atkinson
2 Comments
LVL 17

Comment

by:pjam
Wanted to watch you video, but had this problem:
Video Not working
0
LVL 16

Comment

by:Albert Widjaja
Hi Brian,

Is this for the NEsted ESXi lab purpose or for production ESXi use ?
0
HOW TO: BOOT VMware vSphere Hypervisor 7.0 (ESXi 7.0 ARM) from an iSCSI LUN for the Raspberry Pi 4
Article by: Andrew Hancock
HOW TO: BOOT VMware vSphere Hypervisor 7.0 (ESXi 7.0 ARM) from an iSCSI LUN for the Raspberry Pi 4, Step by Step Tutorial with screenshots. Setting up the Synology SAN to allow the Raspberry Pi 4 to BOOT ESXi 7.0 ARM edition.
iSCSI adapter IQN may change during the upgrade of ESXi 7.0 U1
Article by: Victor
According to VMware KB 84339, if the iSCSI adapter IQN is not the user setting then it is auto-generated by ESXi, and the IQN may change post upgrade.