<

Configuring VMware Fault Tolerance (FT)

Posted on
7,186 Points
0 Comments
986 Views
2 Endorsements
Last Modified:
Published
Experience Level: Beginner
4:13
Brian Atkinson
Teach the user how to configure vSphere clusters to support the VMware FT feature

Video Steps

1. Open vSphere Web Client

2. Verify vSphere HA is enabled

3. Verify netowrking for vMotion and FT Logging is in place or create it

4. Turn On FT for a virtual machine

5. Verify that FT is running a secondary VM for the protected virtual machine

2
Author:Brian Atkinson
0 Comments
HOW TO: Install and Connect a VMware vCenter Server 7.0 in linked mode.
Article by: Andrew Hancock
HOW TO: Install and Connect a VMware vCenter Server 7.0 in linked mode.
HOW TO: BOOT VMware vSphere Hypervisor 7.0 (ESXi 7.0 ARM) from an iSCSI LUN for the Raspberry Pi 4
Article by: Andrew Hancock
HOW TO: BOOT VMware vSphere Hypervisor 7.0 (ESXi 7.0 ARM) from an iSCSI LUN for the Raspberry Pi 4, Step by Step Tutorial with screenshots. Setting up the Synology SAN to allow the Raspberry Pi 4 to BOOT ESXi 7.0 ARM edition.