<

Watch Connecting to a Wireless Network

Posted on
6,860 Points
560 Views
3 Endorsements
Last Modified:
Published
Experience Level: Beginner
4:13
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually.

Video Steps

1. After setting up a router, find the network security key and make note of it

2. Click on the internet access icon on the bottom right of your computer screen, and click on your router's name to enter the security key and join the network

3. To get the IP address or DNS Server for connections that must be done manually [Bluray devices or gaming systems] start command prompt and test the following commands: nslookup www.google.com and ipconfig/all

3
Author:Zia Syed
0 Comments
This article is about building Dynamic Multipoint VPN tunnels in Cisco CSR1000V router with IOS XE. There are two spoke routers connected to single tier Phase 1 DMVPN Cloud hosted on CSR1000V router.
The early release of Sage 50 Quantum 2020 has issues with client installation. This article is to help those that may run into this so they can analyze and resolve.

Keep in touch with Experts Exchange

Tech news and trends delivered to your inbox every month